2-in-1 Vacuum Standing & Pre-sealing Machine
Brief Introduction
It is a 2 in 1 machine for pouch cell research. It can be compatible with the following functions. Pouch Cell vacuum standing for electrolyte diffusion after electrolyte injection; Pouch cell vacuum sealing after electrolyte diffusion.
Features
• The sealing head is made of copper, so that the heat transfer effect is good to save power consumption and improve work efficiency, more energy-saving.
• Upper and lower sealing head pressure can be set.
• The upper and lower heads are driven by a cylinder and guided by two linear guide sleeves, which can move up and down flexibly, and the guidance is accurate to ensure the parallelism of the product after edge sealing.
• Through perspective window to observe the changes inside the chamber during work.
• This equipment is applicable for different sizes of batteries and easy to regulate.
• Multi-stage cycles operation function makes the electrolyte absorbing more completely.
• Split design of main machine and control box makes the machine can work either in glovebox or on production line.
• The upper chamber is driven by a cylinder, guided by two linear guide bushes, flexible up and down movement, and accurate guidance to ensure product sealing requirements
• Touch screen operation, high automation.
• The chamber is made of aluminum alloy, which is corrosion-resistant and firm in structure.
Technical Parameter
| Model |
STC-BYF-200J |
| Voltage |
AC220V±10%, 50Hz |
| Power |
300W heating tube;
When heating the power consumption is 600W
|
| Vacuum degree |
Above -95KPa |
| Vacuum standing time |
0~9999s adjustable, pressure adjustable |
| Hot sealing temperature |
RT~250℃ adjustable |
| Temperature accuracy |
±2℃ |
| Hot sealing pressure |
0~8kg/cm2 adjustable |
| Hot sealing time |
0~99s adjustable |
| Sealing blade length |
200mm, customized size is available |
| Sealing width |
5mm, customized size is available |
| Compressed air |
0.4~0.6MPa, if the unit is placed in a glovebox, air source should be used in accordance with the working air of the glovebox |
| Gas consumption |
≈0.2L compressed gas per sealing |
| Chamber inner dimension |
L310 * W300 * H170mm |
| Chamber external dimension |
L510 * W360 * H640mm |
| Electric box dimension |
L450 * W400 * H260mm |
| Weight |
60kg |
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 Year experience for manufacturing battery lab research equipment. We own a professional R& D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch, which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site installation service.
|
|
2-in-1 Vacuum Standing & Pre-sealing Machine for Pouch Cell Production Images
|
